To add a wi-fi profile:
The Mobile Protection console displays with the Status tab active.
The Policy tab displays.
The Policy Details window displays with the General tab active.
The Communication tab displays.
The New panel displays.
Use the following table to complete the fields in the New panel.
|
FIELD |
DESCRIPTION |
|---|---|
|
Service Set Identifier (SSID) |
Enter the network name. This is a free-form field. |
|
Auto join |
From the drop-down menu, select either Yes or No to determine whether to automatically join when this network is detected. Yes is the default. |
|
Hidden network |
From the drop-down menu, select either Yes or No to determine whether the target network is open for broadcasting. No is the default. |
|
Security type |
From the drop-down men, select one of the following to determine the preferred type of encryption:
|
|
Password |
Enter the password for this profile. This field only displays if the Security type field displays one of the following:
|
|
Protocols Accepted EAP types. Authentication protocols accepted on the target network |
Select one of the following checkboxes to select accepted protocols:
This field only displays if the Security type field displays one of the following:
|
|
Protocols EAP-FAST. Configuration of Protected Access Credentials (PAC) |
Select one of the following checkboxes:
This field only displays if the Security type field displays one of the following:
|
|
Authentication Username |
Enter the authentication user name. This is a free-form field. This field only displays if the Security type field displays one of the following:
|
|
Authentication. Use per- connection password. User provides password during connection request |
From the drop-down menu, select either Yes or No. No is the default. This field only displays if the Security type field displays one of the following:
|
|
Authentication password |
Enter the authentication password. This is a free-form field. This field only displays if the Security type field displays one of the following:
|
|
Authentication Identity certificate. Credentials for connection to wireless network |
Credentials for connection to wireless network. This field only displays if the Security type field displays one of the following:
|
|
Authentication Outer Identity. Externally visible identification (for TTLS, PEAP, and EAP-FAST) |
Enter the externally visible identity. This is a free-form field. This field only displays if the Security type field displays one of the following:
|
|
Trusted certificates. Certificates trusted/expected for authentication |
Lists detected certificates. This field only displays if the Security type field displays one of the following:
|
|
Trusted server certificate names. Certificate names expected from authentication server |
User-managed list of server certificate names. You can add or remove names using the + (plus) and - (minus) buttons. |
|
Proxy setup |
From the drop-down menu, select one of the following to configure a proxy to be used with the network:
This is an optional field. |
|
Proxy Server URL |
Enter the URL of the proxy server. This field only displays if the Proxy setup field is set to Automatic. |
|
Proxy server |
Enter the host name or IP address of the proxy server. This field only displays if the Proxy setup field is set to Manual. |
|
Proxy port |
Enter the port number for the proxy server. This field only displays if the Proxy setup field is set to Manual. |
|
Authentication |
Enter the username to be used to connect to the proxy server. This field only displays if the Proxy setup field is set to Manual. |
|
Password |
Enter a password to be used to connect to proxy server. This field only displays if the Proxy setup field is set to Manual. |
COMPANY INFORMATION
